10 mistakes when ordering a kitchen that bring a mountain of problems

Purchase of equipment before ordering a kitchen

A single work surface is a guarantee of convenience and aesthetic appeal of the kitchen interior. The dimensions of the hob, oven and sink must match the dimensions of the worktop. If you buy the equipment in advance, there is a risk of not integrating it into the headset: the tabletop will have to be cut.

Buying a kitchen in an already renovated room

The selection and installation of a kitchen set should be carried out simultaneously with the laying of communications and electrical wiring. All furniture and household appliances have a certain competent arrangement. If, when installing cabinets and cabinets, there is a need to move the oven or sink, the fresh finish will suffer.

Inconvenient height of pedestals

Most often, when ordering a headset, standard parameters are selected, and after installing it, it turns out that cooking in a new kitchen is inconvenient. The height of the working area is made up of the height of the base / plinth, floor cabinets and table top - this is about 85 cm. But tall or short people should be more attentive to these dimensions.

Wrong location of sockets

The placement of the sockets is thought out at the planning stage and the creation of a design project. To calculate the number of required electric points, it is necessary to count all household appliances, adding 25% to the resulting number in reserve. You cannot place sockets above the hob, use extension cords and connect large equipment without a separate machine for each device.

Overly wide drawers

In furniture showrooms, there are drawers that open easily, look stylish and seemingly hold a huge number of items. Their width is about 110 cm, but such products are not suitable for daily use. Filled with crockery or dry food, the drawers become heavy and may fail prematurely.

Ill-conceived lighting

The lack of illumination in the working area will not affect cooking in the best way: if the kitchen is equipped with a single chandelier, the person's shadow will fall on the countertop. The LED strip above it will correct this disadvantage, but all lamps have power supplies, and their location should be foreseen in advance.

Lack of free zones on the countertop

For the convenience of using the kitchen and saving energy, the layout should obey the rule of the working triangle. The sink, refrigerator and stove should be close to each other. It is necessary to leave empty areas between them: then moving around the kitchen will take a minimum of time.

Glossy facades

Smooth facades reflect light, visually expand the space and look spectacular, but exactly until the moment when fingerprints appear on them. To make the kitchen look neat, you will have to wash the doors daily. Is glossy shine worth the time?

Many open shelves

The shelves visually facilitate the design of the headset, but they are also a place for dust accumulation. If you overdo it with the number of open shelves, then the kitchen cluttered with dishes and decor will turn into a cluttered room in which it will be difficult to maintain order.

Haste when signing a contract

When ordering a kitchen, you need to think over the design to the smallest detail. All important points should be reflected on the papers and thoroughly checked by the customer. It is also not recommended to make full payment: not all firms treat their clients in good faith.

Any kitchen should be comfortable, which means that when ordering a headset, you should think it over individually. You should not save on material, fittings and drawers: then the kitchen will serve for many more years.