How to make a hanger with your own hands? MK with photo and video

Wooden floor hanger

This upright wooden pole tripod is easy to make yourself. It looks stylish and non-standard, but does not require any special skills and abilities when created. The hanger is great not only for clothes, but also for storing hats, accessories and handbags. The structure can be equipped with hooks or secured with a hoop.

Tools and materials

To make a floor hanger you will need:

• Wooden sticks or slats about 190 cm high (easy to find at a hardware store).
• Jute or any other suitable rope. Leather cords or wire will also work.
• Paint. Aerosol fits well, but you can use acrylic or just varnish - it depends on the style of the interior.
• Masking tape for two-tone decoration.

Step-by-step instruction

Getting started:

1. We paint the supports in suitable colors. When painting in several shades, we use masking tape. If spray paint is used, protect other surfaces with foil or paper. After drying, it is recommended to varnish the parts so that the wooden hanger will last longer.
   

   

2. We tie the parts tightly with a rope.
   

   

3. Gently push the supports apart to create a stable "tripod". Do-it-yourself hanger in the hallway is ready. The product takes up a lot of space, so it is more convenient to place it in a corner.

DIY clothes rack

An interesting bedside hanger for storing things will turn out from four slats and five short bars. A metal tube serves as a crossbar. In this master class, the bottom shelf is woven from yarn, but you can use boards, lining, or leftovers from old furniture. You will also need a drawing, a jigsaw or a hacksaw, sandpaper, corners and screws. To make the clothes hanger mobile, it can be equipped with wheels.

Metal clothes hanger

A type of rack-hanger - "P" -shaped hanger. Such a detail will have to be in place in a dressing room, in a minimalist Scandinavian interior or in a loft style. To create a floor hanger with your own hands, you will need copper pipes: this eco-friendly and durable material has long been used in the interior and does not lose its relevance.

In the photo there is a metal stand that perfectly complements the interior, where natural materials serve as decoration.

Tools and consumables

To create a floor hanger you will need:

• Epoxy glue.
• Pipes 150 cm (2 pcs).
• Pipes 60 cm (4 pcs).
• Pipe 90 cm.
• Copper tees (2 pcs).
• Copper corners (2 pcs).

Step-by-step instruction

How to make a hanger with your own hands:

1. We fasten two bases on which the product will stand. We take two pipes 60 cm each and fix them with glue and a tee. We create the second support in the same way.
   

   

2. We make a crossbar. We connect two corner pieces with a 90 cm long pipe.
   

   

3. Before assembling the structure, you need to make sure that the glue is completely dry and fastened the parts. We connect one and a half meter pipes by inserting them into tees.
   

   

4. We attach the top bar to the vertical supports.
   

   

5. The floor hanger is ready. It is so thin and light that it can fit into a closet or dressing room if necessary.
   

   

Wall hanger in the hallway

A very beautiful and unusual hanger is made from branches and pine boards. Such a craft will not only surprise guests, but also serve as an original gift for lovers of eco-style or hand-made.

In the photo, a do-it-yourself hanger made of wood and branches.

Tools and materials

For work you will need:

• Board 2.5 cm thick and 220 cm long.
• Saw.
• Branches (the number depends on their thickness).
• Pencil.
• Roulette or ruler.
• Drill and drill.
• Screws.
• Adhesive for joining boards.
• Putty.
• Sandpaper.
• Paint and brush.
• Wall mount.

Step-by-step instruction

We start making a wall hanger in the hallway with our own hands:

1. We do the markup with a pencil and a ruler, cut the board. You should get 4 segments: two 70 cm and two 40 cm.
   

   

2. We assemble the frame and make holes in the boards with a drill. We connect the elements with glue.
   

   

3. We fix the parts with screws.

   

4. We lay out the branches and determine their size using the finished frame.
   

   

5. We fix the branches and cut them to the required length.
   

   

6. Carefully make a hole in the frame and branch. We fix them with a screw. We repeat the steps for other branches.
   

   

7. We apply putty to eliminate defects and get rid of the grooves on the frame.
   

   

8. Let the putty dry. We process the wooden surface with medium and fine sandpaper.
   

   

9. We paint the frame and branches in the same tone.
   

   

10. We fix the fasteners with a drill on the back of the structure. A hanger made of scrap materials is ready.
    

    

A selection of interesting ideas

To make a luxurious hanger in the corridor or hallway, it is enough to find a slab of a suitable size and varnish it. The more textured the edges of the saw cut, the more beautiful and richer the final result looks. To create a wall hanger, you will also need hooks: they are attached in one row at the same distance from each other.

A hanger made of fittings looks even more unusual. To weld a structure, special tools and skills are required. The brutal design of the product will organically fit into the interior in the loft style.

In the photo, a hanger made with your own hands, the service life of which is close to eternity.

An even rougher, but original version of the hanger for a "man's den" is a structure made of a metal pipe, fixed to the wall. Large construction hooks serve as garment holders. Such a designer thing costs several thousand rubles, but you can make it yourself.

Fans of eco-style will appreciate this floor hanger made of real branchy wood. To turn waste material into a useful and beautiful piece of furniture, you need to pick up a dry tree trunk of a suitable size and cut off excess branches. Small knots come in handy for hanging light items. The bark can be peeled or left, depending on the master. You can fix the trunk using self-tapping screws, branches, a round wooden saw cut or a regular board. If the bark has been removed, it is best to cover the product with wood stain, varnish or paint.

A pallet hanger fits perfectly into a bright modern interior. For its production, it is recommended to choose a pallet that meets the EUR or EPAL standards. First, you need to clean the workpiece from dirt and process it with a grinder: there should be no dangerous defects on the surface. Then you should saw off the excess parts of the pallet, leaving only the frame. The structure can be painted or varnished. The last step is to fix the hooks for caps, scarves and other things, after which the product can be hung on the wall.

Even the remnants of pallets can serve as an original decoration of the hallway: it is enough to show imagination.

The photo shows polished pieces of wood, painted in different colors and fastened to each other on a wooden base.

A lightweight and inexpensive clothes rack can be assembled from ordinary plastic pipes. If you adhere to a certain technology during manufacturing, the structure will turn out to be strong and durable. For manufacturing, you will need pipes with a diameter of 20-25 mm, right angle bends, T-shaped connectors, plugs, caps and glue. If desired, the product can be painted with spray paint with a metallic effect. This rack will look great in a country house or garden.

Pictured is an easy-to-assemble white PVC pipe rack.

Photo gallery

If there is not enough space in the hallway, this drawback can be easily turned into an advantage by creating an open hanger or rack with your own hands. The finished product can become a highlight of the interior. A few more unusual options and original ideas are presented in our gallery.