How to clean rust in the toilet at home?

Citric acid - removes fresh stains

If rust has recently formed on the surface of the plumbing, you can deal with it with the help of citric acid, which every housewife has in stock.

You will need 2-3 packets of lemon and a brush necessary for cleaning. Under no circumstances should metal brushes and sponges be used, as they lead to the formation of scratches and pores, in which stubborn dirt will accumulate in the future.

• In order to clean the rust in the toilet, you need to remove the water from it as much as possible and pour citric acid into it.
• Then you need to close the lid and leave the product for 3-4 hours. Stubborn rust may take longer to remove.
• After this time, it is necessary to wash off the citric acid and clean the plumbing with a brush to remove the remaining plaque.

Citric acid with vinegar is an easy way to bring purity back

At home, you can easily make an effective toilet rust remover. This will require citric acid and vinegar.

• Pour 1/3 cup of table vinegar into the spray bottle.
• Two packets of lemon must be poured into a dry toilet bowl.
• Then you need to spray vinegar on its surface. The reaction of these two substances will cause the citric acid powder to foam.
• The mixture must be left on the walls of the plumbing for 4 hours. During this time, the rusty coating will become soft, and it can be easily removed with a brush.

Soda and vinegar - two cleaning methods

With the help of these substances, quickly get rid of rusty smudges in the toilet bowl. There are two ways to act.

1. Bring 1 cup vinegar to a boil. While it's hot, add the baking soda. Apply the hot mixture to the rusty areas. After 2-3 hours, rinse the surface of the toilet bowl with running water.
2. Pour a small amount of water over the baking soda and stir thoroughly to form a smooth paste. Apply the composition to the contaminated surface and leave for an hour. Pour vinegar into a spray bottle and moisten the walls of the plumbing fixture. When the chemical reaction is over and the mixture stops sizzling, flush the water from the tank.

In both cases, you can finish the toilet with soapy water. Any liquid soap is suitable for its preparation.

Electrolyte - elimination of stubborn dirt

If the walls of the plumbing have lost their whiteness, an electrolyte will help correct the situation. The substance, which is the most important component of a car battery, contains sulfuric acid. It actively interacts with oxides and salts.

Since the electrolyte is poisonous, protective accessories should not be neglected when cleaning. You will need not only gloves and a face mask, but also a respirator.Respiratory protection is necessary not only because of the unpleasant odor, but also because inhaling the smallest particles of electrolyte is dangerous to health.

The composition applied to contaminated areas instantly triggers a chemical reaction. The electrolyte is washed off after 15 minutes; if necessary, rust residues are removed with a brush.

Since the cleaning composition is toxic, it is recommended to use it only if the layer of rusty deposits is very large, and there is no money to purchase high-quality household chemicals. Do not use electrolyte if the toilet is connected to the sewerage system with polypropylene pipes.

Domestos - effective anti-rust and stain remover

Such household chemicals make it easy to clean the toilet bowl from red streaks and plaque from water. There is no chlorine in the composition of the product, and the main substance that has a cleansing effect is hydrochloric acid. Unlike alkaline formulations, an acid-based gel not only helps in the fight against rust, but also kills bacteria.

The cleaning agent works even under water. Due to its thick consistency, the gel is consumed economically and is evenly distributed over the surface during cleaning.

To remove rust from the toilet bowl and to desenify it, the product is applied to the surface, not forgetting about the areas under the rim, and left for 30 minutes. Then they clean the plumbing with a brush and rinse with water.

Cillit BANG - quick removal of rust

The advantage of liquid detergent is that it does not scratch the surface of the plumbing. Cillit BANG gel restores the original cleanliness of the treated surfaces, removing plaque and red streaks from hard water. Using an acidic detergent, you can clean the rust in the toilet and restore the shine of the chrome-plated parts.

Concentrated chemicals can corrode the chromium coating, it is better to test the action of the product on a small area before use.

• To clean the plumbing, you need to apply the gel to the dirty area for just 1 minute.
• After this time, you should rinse the treated area and wipe it with a napkin.
• If the rusty coating is very persistent and cannot be removed the first time, the procedure must be repeated.
• You have to wear gloves when working with an aggressive cleaning agent.
• Before cleaning, be sure to read the instructions and precautions.
• Thanks to the economical consumption, household chemicals will last for a long time.

Sarma - powder for cleaning and disinfection

The abrasive not only effectively fights rusty deposits, but also removes bacteria.

• The powder must be poured into the bloom.
• On damp areas, the product immediately changes color to blue.
• It is necessary to carefully rub the treated areas with a brush or sponge.
• To wash off the powder, running water is not enough, since its residues after drying will appear in the form of whitish spots.
• After cleaning, you need to rinse the plumbing with running water and wipe it with a rag.

The advantages of the cleaning agent include its suitability for cleaning not only in the toilet and bathroom, but also in the kitchen. Such household chemicals remove rust and grease, and have a whitening effect. Thanks to its versatility and pleasant, rich aroma of freshness, Sarma cleaning powder is sure to find use in the household.

The following video provides additional guidance on how to clean rust in the toilet. Simple tips will help you quickly deal with dirt.

After you have managed to remove rust from the toilet, it is necessary to take preventive measures to prevent rust stains from reappearing. It is important that the tank does not leak. Plumbing should be treated weekly with bleach. You can purchase special tablets that are attached to the toilet or placed in the cistern. You also need to clean the tank with whiteness or vinegar as needed. By following these guidelines, you no longer have to worry about how to clean rust in the toilet.