The fastest way to restore a bathtub: acrylic liner

Over time, bathtubs begin to look unpresentable. Tap water and misuse are to blame.

Buying the cheapest cast iron bathtub will cost the owners about 15,000 rubles... Price for acrylic model in a reduced price segment - 8000... The cost of acrylic liners, which are installed using technology "Bath in bath" starts from 3800... The difference is obvious.

Installation steps

1. Measurement of the warping bath;
2. selection of a suitable acrylic liner;
3. grinding the bottom and walls of the old bathtub, thoroughly cleaning and drying it;
4. treatment of surfaces adjacent to the elements of the drain-overflow system with silicone sealant;
5. drilling holes for drain and overflow on the insert;
6. treatment of the base with a special two-component foam for gluing;
7. installation of the liner in the bath;
8. fixing fittings and processing joints with the wall.

You need to mount the bath carefully so as not to move the foam layers

Experts advise to fill the bath with water after installing the liner. The hitching process under the weight of several tens of liters of water will be faster and better. The decision to replace the bathtub or install the liner depends largely on the needs and financial capabilities of the apartment owners.

An analysis of the advantages and disadvantages of the "bath in bath" technology will help to make the final choice.

Before filling with water, the master will additionally supply fixing spacers

Benefits

• If installed correctly, the insert can last up to 15 years;
• heats up quickly and maintains water temperature longer than conventional materials;
• completely safe for health, suitable for bathing children;
• resistant to rust stains and scratches;
• retains good appearance when used with suitable detergents;
• cheaper than replacing a bath;
• the installation process takes no more than 2 hours.

Bathtubs with acrylic inserts look like new from the inside

disadvantages

• It is very difficult to choose an insert for a non-standard bath, you will have to make it to order and significantly lose in price;
• in rare cases, for installation, you have to remove the layer of tiles adjacent to the bathroom;
• installation of the insert reduces the capacity of the bath;
• some liner manufacturers set a weight limit of 70 kg;
• after installing the liner, it is better not to lean on the bathtub and not to use it for its intended purpose for at least 2 days;
• installation errors can provoke the appearance of a space between the base and the insert - a favorable environment for the formation of mold and mildew.

If the installation technology is violated, such chips may occur due to the fall of large objects.

Before and after photos

The deplorable state of the bath is not a limitation for the use of an acrylic insert. The main condition is the absence of through holes. The inside of the plumbing will change beyond recognition, and the outside can be painted or hidden in a ceramic tile apron.

An acrylic bath liner can significantly extend the life of the bathtub and improve its appearance. The main thing is to treat his choice responsibly, and not skimp on paying for the services of the master, because the main source of problems is the violation of installation technologies.